Whirlpool AWG 870 Instruction for Use download pdf (Page 7)

WASHING PROGRAMME

Select the programme:

1.Check that the Programme Selector is on “Stop”.

2.Plug in the appliance.

3.Open the tap.

4.Set the Programme Selector to the desired programme.

5.Depending on model, set the Temperature Selector knob to the desired temperature.

6.Depending on model, set the Spin Speed Selector knob to the desired spin speed.

7.Select the options desired by pressing the corresponding buttons.

By a further pressing of the button this option can be turned off again.

8.Check that the door is well closed. Press the

“On/Off”

button . The indicator lamp lights up.

Attention: During the selected washing programme the programme selector knob moves by steps

clockwise. Never force it in the opposite direction.

Door lock

The door locks automatically after the programme start until the end of the programme.

If the programme selector is moved to the “Stop” position or if the electricity supply is interrupted,

then the door is released after approximately two minutes.

In this case do not open the door: because hot water could come out of the door.

Programme end

The programme selector knob is at the stop position.

1.Press “On/Off” button . The indicator light turns off .

2.Cancel the special options by pressing the appropriate buttons.

3.Turn off the tap.

4.Wait for the door to unlock (about 2 minutes).

5.Open the door and unload the machine.

N.B. Do not fully close the door but leave it ajar to allow the drum to dry out.

Changing programme

1.Press “On/Off” button . The indicator light turns off .

2.Select the new programme.

3.Press “On/Off” button . The new program will re-start.

Do not add detergent for this programme.

Programme interruption or pause

To interrupt the running programme for a certain period and continue it at a later time:

1.Press “On/Off” button .

2.Following the desired pause press the “On/Off” button again.

3gb20003.fm5 Page 61 Thursday, January 3, 2002 9:46 AM

Black Process Plate

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Whirlpool AWG 870 Instruction for Use Page 7