Whirlpool WGFD295 Instruction Manual download pdf (Page 4)

PRODUCT DESCRIPTION

AND APPLICATION

Shipping Inspection

All units are securely packed in shipping containers tested

according to International Safe Transit Association specifications.

The carton must be checked upon arrival for external damage. If

damage is found, a request for inspection by carrier’s agent must

be made in writing immediately.

The furnace must be carefully inspected on arrival for damage

and bolts or screws which may have come loose in transit. In the

event of damage, the consignee should:

1. Make a notation on the delivery receipt of any visible damage

to the shipment or container.

2. Notify the carrier promptly and request an inspection.

3. With concealed damage, the carrier must be notified as soon

as possible—preferably within 5 days.

4. File the claim with the following support documents within a

9-month statute of limitations.

■ Original or certified copy of the Bill of Lading, or

indemnity bond.

■ Original paid freight bill or indemnity in lieu thereof.

■ Original or certified copy of the invoice, showing trade

and other discounts or reductions.

■ Copy of the inspection report issued by carrier’s

representative at the time damage is reported to carrier.

The carrier is responsible for making prompt inspection of the

damage and for a thorough investigation of each claim. The

distributor or manufacturer will not accept claims from dealers for

transportation damage.

Electrostatic Discharge (ESD)

NOTE: Discharge static electricity accumulated in the body

before touching the unit. An electrostatic discharge can adversely

affect electrical components.

Use the following steps during furnace installations and servicing

to protect the integrated control module from damage. By putting

the furnace, the control and the person at the same electrostatic

potential, these steps will help avoid exposing the integrated

control module to electrostatic discharge. This procedure is

applicable to both installed and noninstalled (ungrounded)

furnaces.

1. Disconnect all power to the furnace.

NOTE: Do not touch the integrated control module or any

wire connected to the control prior to discharging your body’s

electrostatic charge to ground.

2. Firmly touch a clean, unpainted, metal surface of the furnace

away from the control. Any tools held in a person’s hand

during grounding will be discharged also.

3. Service the integrated control module or connecting wiring

after following the discharge process in Step 2.

NOTE: Do not recharge your body with static electricity by

moving or shuffling your feet or touching ungrounded

objects. If you touch an ungrounded object, repeat Step 2

before touching the control or wires.

4. Follow steps 1 through 3 before removing a new control from

its container or installing the control on a furnace. Return any

old or new controls to their containers before touching any

ungrounded object.

To The Installer

Before installing this unit, please read this manual thoroughly to

familiarize yourself with specific items which must be adhered to,

including, but not limited to:

■ Unit maximum external static pressure

■ Gas pressures

■ Btu input rating

■ Proper electrical connections

■ Circulating air temperature rise

■ Minimum or maximum CFM

■ Motor speed connections

Important Note to the Owner Regarding

Product Warranty

Your warranty certificate is supplied as a separate document with

the unit installed by your contractor. Read the limited warranty

certificate carefully to determine what is and is not covered. Keep

the warranty certificate in a safe place. If you are unable to locate

the warranty certificate, please contact your installing contractor,

or contact customer service at 1-866-944-7575 to obtain a copy.

To receive the Lifetime Heat Exchanger Limited Warranty, good

for as long as you own your home, and the 10-Year Parts Limited

Warranty, online registration must be completed within 60 days of

installation. Online registration is not required in California or

Quebec.

Full warranty details and instructions for models currently in

production are available at www.whirlpoolhvac.com. If your

model is not currently in production or does not appear on the

website, please contact your installing contractor or contact

customer service at 1-866-944-7575 to obtain a copy of your

warranty certificate.

To register your unit, go to www.whirlpoolhvac.com. Click on the

manufacturer’s Comfort Commitment

Warranty link located at

the bottom center of the home page. Next, click on the Click

Here to Register Your Product link located at the top center of the

page, and complete the forms in the manner indicated.

Goodman 43

Should overheating occur or the gas supply fail to shut

off, turn off the manual gas shutoff valve external to the

furnace before turning off the electrical supply.

WARNING

Goodman 48

Possible property damage, personal injury or death due

to fire, explosion, smoke, soot, condensation, electrical

shock or carbon monoxide may result from improper

installation, repair, operation or maintenance of this

product.

WARNING

Goodman 49

To prevent property damage, personal injury or death due

to fire, do not install the furnace in a mobile home, trailer

or recreational vehicle.

WARNING

1 2 3 4 5 6 7 8 9 ... 51 52

Comments to this Manuals

No comments

Whirlpool WGFD295 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Water heaters & boilers Whirlpool WGFD295