Whirlpool BMBL 1833 V H/HA Instruction for Use Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
20
GB
1 1
2
Defrosting the freezer compartment
If the frost layer is greater than 5 mm, it is necessary
to defrost manually:
1. The day before defrosting, press the SUPER
FREEZE button (the yellow SUPER FREEZE indicator
light illuminates) to further cool the food.
2. The function is automatically disabled after 24
hours, or it may be disabled at any moment by
pressing the SUPER FREEZE button again. At this
point, set the FREEZER OPERATION knob on
,
which will switch the refrigerator off.
3. Wrap frozen foods in newspaper and place them in
another freezer or in a cool place.
4. Leave the door open until the frost has melted
completely. This can be made easier by placing
containers with lukewarm water in the freezer
compartment.
5. Certain appliances are fitted with the DRAIN
SYSTEM to lead the
water outside: let the
water flow into a
container (see diagram).
6. Clean and dry the freezer compartment carefully
before switching the appliance on again.
7. Wait for approximately 2 hours, i.e. until the ideal
storage conditions have been restored, before
placing food in the freezer compartment.
Replacing the light bulb
To replace the light bulb in the refrigerator
compartment, pull out the plug from the electrical
socket. Follow the instructions below.
Access the light bulb by removing the cover as
indicated in the diagram.
Replace it with a similar light bulb within the power
range indicated on the cover (15W or 25W).
PURE WIND PLUS
Filter maintenance
Unhook the filters from the left side of the cover by
inserting the tip of a small screwdriver into the gaps
(see attached pictures).
Wash the filters regularly (every 12-18 months) under
running water, using a neutral detergent to remove
any stubborn build-up. Leave the filters to dry before
replacing them. If the filters cannot be removed, or if
they are difficult to remove, please contact the
Technical Assistance Service.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comments to this Manuals

No comments