Whirlpool GC1SHAXM User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
2-2
DOOR REMOVAL
HANDLE REMOVAL (OPTIONAL)
1. Using a Phillips screwdriver, remove the
screws located on the inside of each door
handle. Pull the door handle straight out
from the door (see Illustration 1). Save the
screws for reattaching the handles.
2. To make the cabinet flush, use a flat-blade
screwdriver, and remove the screws at
-
taching the door handle posts to the re
-
frigerator cabinet. Reverse the procedure
to replace the handles.
DOOR REMOVAL
Electrical Shock Hazard
Disconnect power before removing
doors.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Open both doors and remove the two
screws from the base grille. Pull the base
grille forward and remove it (see Illustra
-
tion 2).
7. Remove the remaining left hinge screws
and hinge (see Illustration 4).
8. Carefully lift the freezer door straight up
and off the bottom hinge (see Illustration
5). The water dispenser tubing will remain
attached to the freezer door, and will pull
through the bottom left hinge. Make sure
that you protect the dispenser tubing from
damage when you set the door on the
floor.
9. Remove the top right hinge cover and
screws (see Illustration 6).
10. Lift the refrigerator door straight up and
off the bottom hinge.
11. Disassemble the hinges as shown (see Il
-
lustration 7). Do not remove the screws.
3. Close both doors and keep them closed
until you are ready to lift them off the cabi-
net.
4. If you have a dispenser (ice or water),
disconnect the water dispenser tubing,
located behind the base grille on the freezer
door side (see Illustration 3). To do this,
press the red outer ring against the face
of the fitting, and pull the dispenser tubing
free. NOTE: On some models, you will
have to remove the tubing from a hose
clip.
5. Remove the top left hinge screw and cover
as shown (see Illustration 4).
6. Disconnect the wiring plug as shown.
TOOLS REQUIRED
1/2ʺ & 5/16ʺ Hex-Head Socket Wrenches
Flat-Blade Screwdriver
#1 & #2 Phillips Screwdrivers
BEFORE YOU BEGIN
Turn the refrigerator control OFF. Unplug the
refrigerator or disconnect power. Remove the
food and any adjustable door or utility bins
from the doors.
1. Do not remove screw 1
2. Wiring plug
1
2
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comments to this Manuals

No comments