Whirlpool Kitchen Aid KAR-19 Service Manual download pdf (Page 33)

4-7

Electrical Shock Hazard

Connect green ground wire to ground

screw.

Failure to do so can result in death or

electrical shock.

REASSEMBLY NOTE: Be sure to reconnect

the green ground wires; one to the compressor

terminal, and the other to the chassis (see the

previous steps).

7. To remove the main control board as-

sembly:

a) Remove the unit compartment cover

(see pages 4-2 & 4-3 for the proce-

dures).

b) Remove the two hex-head screws from

the rear of the main control board as-

sembly enclosure, and position it so

you can access the board.

c) Remove the wire connectors from the

main control board assembly.

Wire Connectors

Screws At Rear Of Enclosure

d) Remove the main control board from

the five standoffs. Press in on the lock-

ing tab on each standoff to release the

board.

Press Locking Tab

On Standoff

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

No comments

Whirlpool Kitchen Aid KAR-19 Service Manual Page 33