Whirlpool Kitchen Aid KAR-19 Service Manual download pdf (Page 48)

4-22

REMOVING THE WATER VALVE

Electrical Shock Hazard

Disconnect power before servicing.

Replace all panels before operating.

Failure to do so can result in death or

electrical shock.

5. Disconnect the 1/2″ nut from the water

valve inlet.

6. Remove the two hex-head mounting

screws from the water valve mounting

bracket.

NOTE: Sharp edges may be present.

1. Unplug the refrigerator or disconnect the

power.

2. Remove the two screws from the base

grille and remove the grille.

3. Turn off the water supply to the refrigera-

tor.

Base Grille

Screw

NOTE: The water valve location is shown be-

low.

Water Valve

4. Position a container to catch the water in

the next step.

7. Pull the water valve forward and discon-

nect the water outlet tubing nut(s).

8. Disconnect the solenoid connector(s)

from the water valve terminal(s).

Water Valve

Inlet Tubing

Water Valve

Bracket Screws

Solenoid Connectors

Water Outlet Tubing Nuts

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

No comments

Whirlpool Kitchen Aid KAR-19 Service Manual Page 48