Whirlpool AMD 383 Instruction for Use download pdf (Page 31)

DRAIN PIPING WORK

Make sure the drain flows out

CAUTION

1. Drain piping

• The drain pipe outlet direction can be chosen from

either the right rear or right.

• The diameter of the drain pipe should be equal to

or greater than the diameter of the connecting pipe

(vinyl tube; pipe size: 20 mm; outer dimension: 26

mm).

• Keep the drain pipe short and incline downwards at

the gradient of at least 1/100 to prevent air pockets

(refer to fig. 1).

• Use the attached drain hose (4) and clamp (5).

Insert the drain hose completely into the drain

socket . Tighten the clamp within the range of gray

tape until the screw head is less than 4 mm from

the hose (refer to fig. 2, 3).

• Wrap the attached sealing pad (11) over the clamp

and drain hose to insulate. (Refer to fig. 3).

• No folding of drain hose inside the indoor unit

(refer to fig. 4).

(2) Confirm that smooth drainage is achieved after the

piping work.

• Pour 600 cc of water into the drain pan from the air

outlet for confirming drainage (refer to fig.5).

(When drain hose is connected)

Incline the drain hose

Not to be lifted

No foldings

Not to be soaking in water

Fig. 1

Clamp (5)

Fig. 2

Taping area (Gray)

Drain hose (4)

Fig. 3

Clamp (5)

(accessory)

Large sealing pad (11)

(accessory)

4 mm or less

Fig. 4

Fig. 5

Air outlet

Watering can

1 2 ... 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Whirlpool AMD 383 Instruction for Use Page 31

Comments to this Manuals