Whirlpool WHES45 Troubleshooting Guide download pdf (Page 22)

Set Model Code

The model code is factory set at assembly and testing. The model code should never require resetting,

but to check, or to set if previously omitted, follow the steps below.

1. Press and hold in the

PROGRAM button until the Regeneration (Start) Time screen begins

to flash. Press and hold in the PROGRAM button again. E ither “A -- -- --” or the previously set code

“L 45” will appear.

2. Use the Up or Down buttons to set the model code. If no more settings need to be

changed, press the PR OGRAM button until the display returns to the present time of day.

Set12or24HourClock

With 12 hr set, all time displays are in standard clock time, 12:00AM to 11:59PM. If 24 hr is set, time

displays are in military time, 0100 (1:00AM) to 0000 (midnight). Do the following steps to change from

the 12 hr setting.

1. Press and hold in the PROGRAM button until the Regeneration (Start) Time screen begins

to flash. Press and hold in the PROGRAM button again until the model code screen starts to flash.

Press and release the PROGRAM button once more to move to the clock setting screen.

TIME

2. Use the Up or Down buttons to toggle between 12 hour clock and 24 hour clock. Press

the PROGRAM button twice to set the clock and return to the present time of day display.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 34 35

No comments

Whirlpool WHES45 Troubleshooting Guide Page 22