Whirlpool EF 4000-1 IN Instruction for Use download pdf (Page 18)

INSTALLATION

ELECTRICAL PART

IMPORTANT: Install the appliances following the

manufacturer’s instructions.

Incorrect installation can cause damage to

people, animals or things, for which the

manufacturer cannot be held responsible.

− The appliance must be connected to the mains by a

competent electrician and according to the

regulations in force.

− The appliance must be connected to the mains,

checking first of all that the voltage corresponds to

the value given on the rating plate and that the

section of the electrical cables can take the load

indicated on the rating plate.

− Fit a standard plug which is suitable for the power

absorbed by the appliance and in conformity with

the local rules in force.

− The plug must be put into a socket connected to

the earth system in compliance with safety rules.

− For the United Kingdom:

As the colours of the wire of the supply cable of

this appliance may not correspond with the colours

which identify the terminals of your plug, proceed as

follows:

- the yellow/green wire must be connected to the

plug terminal marked with the letter E or with the

earth symbol or coloured green or yellow/green;

- the blue wire must be connected to the terminal

marked with the letter N or coloured black;

- the brown wire must be connected to the

terminal marked with the letter L or coloured red;

− The connection can be made directly to the mains

by putting an all-pole switch with minimum opening

between the contacts of 3 mm between the

appliance and the mains.

− The supply cable must not touch hot parts and must

be so positioned that it does not exceed the

temperature of 75

C at any point.

− When the appliance is installed the switch or socket

must always be accessible.

− The appliance must have its own supply; any other

appliances installed near it must be supplied

separately.

N.B. For connection to the mains do not use adapters,

reductions or shunts because these can cause

overheating or burning.

If the installation requires modifications to the domestic

electrical system or if the socket and the appliance plug

are not compatible, contact a professional electrician.

He must, in particular, also make sure that the section

of the socket cables is suitable for the power absorbed

by the appliance.

The appliance must be connected to the earth.

The manufacturer declines all responsibility for

any problem caused by failure to observe this

instruction.

1 2 ... 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Whirlpool EF 4000-1 IN Instruction for Use Page 18

Comments to this Manuals

Related products and manuals for Deep fryers Whirlpool EF 4000-1 IN