Whirlpool 66161279 Use and Care Guide download pdf (Page 12)

Attach Side Curtains to Windowsill—Side Curtain

Bracket (on some models)

1. Slide the side bracket over the bottom of the right-hand

curtain frame.

2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the

side bracket and into the windowsill.

3. Using a ³⁄₄" screw, attach the side bracket to the windowsill.

4. Repeat for side bracket installation on the left-hand side of

the air conditioner.

Complete Installation

1. Insert the foam seal without adhesive strip behind the top of

the lower window sash and against the glass of the upper

window.

2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the

top channel and into the window sash.

3. Attach the top channel to the window sash with a ³⁄₄" screw to

secure the window.

4. Place the window lock bracket as shown. Use a ¹⁄₈" drill bit to

drill a starter hole through the hole in the window lock bracket

and into the upper window.

5. Attach the window lock bracket to the upper window with

one ³¹⁄₃₂" screw to secure the window in place.

6. Plug into a grounded 3 prong outlet.

7. Press RESET on the power supply cord. See “Electrical

Requirements.”

8. Remove the clear plastic film from the control panel and

plastic front.

A. Top of lower window sash

B. Foam seal

A. Window lock bracket

B. Upper window

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

No comments

Whirlpool 66161279 Use and Care Guide Page 12