Whirlpool 66161279 Use and Care Guide download pdf (Page 16)

Storing the Remote Control

Store the remote control by placing the back side, containing a

magnet, against the side of the air conditioner cabinet in the

locations shown in the following illustration.

NOTE: The dotted lines do not appear on the unit cabinet. They

show the locations of the metal plates in the illustration only.

Power

1. Press POWER to turn on air conditioner.

2. Press POWER again to turn off the air conditioner.

Mode

Press MODE to choose Cool, Eco (on some models), Overnight

(on some models) or Fan Only.

Fan Speed

1. Press FAN SPEED until you see the Bar LED on the air

conditioner control panel display for the desired setting.

2. Choose Low, Medium, High or Auto.

NOTES:

■ Auto fan speed and Temperature cannot be selected in

Fan Only mode.

■ In Eco (on some models) and Cool modes, Auto fan

speed is selected automatically.

NOTE: After 5 seconds, the display on the air conditioner control

panel will show the current room temperature.

Temperature

■ Press the up arrow button to raise the temperature. Each time

you press or hold the up arrow button, the temperature will go

up 1ºF (1ºC) until it reaches 86°F (30°C).

■ Press the down arrow button to lower the temperature. Each

time you press or hold the down arrow button, the

temperature will go down 1ºF (1ºC) until it reaches 61°F

(16°C).

Changing Air Direction

Use tab to direct the air right or left.

AIR CONDITIONER CARE

Your new air conditioner is designed to give you many years of

dependable service. This section tells you how to clean and care

for your air conditioner properly. Call your local authorized dealer

for an annual checkup. Remember … the cost of this service call

is your responsibility.

Cleaning the Air Filter

The air filter is removable for easy cleaning. A clean filter helps

remove dust, lint, and other particles from the air and is important

for best cooling and operating efficiency. Check the filter every

2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in

place.

1. Turn off the air conditioner.

2. Remove the air filter by pressing down on the tabs on the air

intake grille and pulling the grille away from the air

conditioner.

Power

Mode

Fan Speed

A. Tab

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Comments to this Manuals

No comments

Whirlpool 66161279 Use and Care Guide Page 16

Comments to this Manuals

Related products and manuals for Split-system air conditioners Whirlpool 66161279