Whirlpool 66161279 Use and Care Guide download pdf (Page 6)

2. Press RESET (on some devices, a green light will turn on).

3. Press TEST (listen for click; Reset button will trip, and on

some devices, a green light will turn off).

4. Press and release RESET (listen for click; Reset button will

latch, and on some devices, a green light will turn on). The

power supply cord is ready for operation.

NOTES:

■ The Reset button must be pushed in for proper operation.

■ The power supply cord must be replaced if it fails to trip when

the test button is pressed or fails to reset.

■ Do not use the power supply cord as an off/on switch. The

power supply cord is designed as a protective device.

■ A damaged power supply cord must be replaced with a new

power supply cord obtained from the product manufacturer

and must not be repaired.

■ The power supply cord contains no user serviceable parts.

Opening the tamper-resistant case voids all warranty and

performance claims.

INSTALLATION INSTRUCTIONS—5500 BTU, 6300 BTU, 8000 BTU

Unpack the Air Conditioner

Remove Packaging Materials

■ Handle the air conditioner gently while unpacking the unit.

■ Cut the 4 plastic bands that secure the carton.

■ Remove the carton top and lift the air conditioner from the

base pad.

■ Remove tape and glue residue from surfaces before turning

on the air conditioner. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

■ Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your air conditioner.

■ Remove any packaging materials inserted into the side

louvers.

■ Dispose of/recycle packaging materials.

Prepare Air Conditioner for Installation

Install Top Channel

1. Remove the plastic covering the adhesive on the top channel

seal and attach the seal to the top channel, lining up the holes

in the seal and the top channel.

2. Place the top channel on the top of the air conditioner, lining

up the holes in the top channel with the holes in the top of the

air conditioner.

3. Using four ³⁄₈" screws, attach the top channel to the air

conditioner.

NOTE: Your model may differ from the one shown.

Install Side Curtains

NOTE: Attach curtains to the air conditioner before placing the air

conditioner in window.

1. Place the tabbed side of the side curtain in the track on the

right-hand side of the air conditioner cabinet.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

air conditioner.

Failure to do so can result in back or other injury.

³⁄₈

" screws

B. Top channel

A. Tabbed side of side curtain

B. Curtain frame

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Comments to this Manuals

No comments

Whirlpool 66161279 Use and Care Guide Page 6

Comments to this Manuals

Related products and manuals for Split-system air conditioners Whirlpool 66161279