Whirlpool Duet GHW9100LW2 Use and Care Guide download pdf (Page 12)

Pausing or Restarting

To pause the washer at any time, select PAUSE/CANCEL.

To continue the cycle, select HOLD TO START (for

approximately 1 second).

Changing Cycles, Options and Modifiers

Not all Options and Modifiers are available with all cycles. Cycles,

Options and Modifiers can be changed anytime before HOLD TO

START is selected.

Options and Modifiers can be changed anytime after HOLD TO

START is selected and before the start of the selected Option or

Modifier.

To cancel a cycle and select a new cycle

Select PAUSE/CANCEL twice.

Select desired cycle.

Select the desired OPTIONS.

Select HOLD TO START (for approximately 1 second) to

restart the washer at the beginning of the new cycle.

To cancel a cycle

Select PAUSE/CANCEL twice.

The washer powers down, the door unlocks, and clothes can

be removed.

NOTE:

If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has started

Select PAUSE/CANCEL.

Select the desired OPTIONS or MODIFIERS.

Select HOLD TO START (for approximately 1 second) to

continue the cycle.

To drain the washer manually

Select PAUSE/CANCEL.

Select DRAIN/SPIN.

Select HOLD TO START (for approximately 1 second) to

begin the drain.

When the spin is complete, the door unlocks. Items can be

removed from the washer.

Status Lights

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Adding items

You can add items to the washer after the cycle has started for

Whitest Whites, Heavy Duty, and Normal/Casual, if the ADD A

GARMENT status light is glowing.

To add items

Select PAUSE/CANCEL. The washer door unlocks, and items

can be added.

To continue the cycle, close the door and select HOLD TO

START (for approximately 1 second).

Cycle Complete

The cycle complete light stays on for 5 minutes after the cycle is

complete, and then the washer shuts off.

Locking controls

The Control Lock prevents unintended use of the washer. You

can also use the control lock feature to prevent unintended cycle

or option changes during a cycle. When CONTROL LOCKED is

lit, all buttons are disabled except for PAUSE/CANCEL and

START. You can lock the controls while the washer is operating.

To lock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds.

The CONTROL LOCKED status light glows.

To unlock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds until the

CONTROL LOCKED status light turns off.

Estimated time remaining

The cycle time varies automatically based on your water

pressure, water temperature, detergent and clothes load. The

cycle time will be extended if oversudsing occurs or the load is

unbalanced.

Cycles

Cycles can be selected by turning the Cycle control knob to the

desired cycle. Each cycle is designed for different types of fabric

and soil levels.

■

Each cycle has a preset Soil Level (cycle time), Water

Temperature and Spin Speed, and may have preset options.

The preset settings provide the recommended fabric care for

the selected cycle.

■

The preset settings can be changed anytime before HOLD TO

START is pressed. Not all options and modifiers are available

with all cycles. (To change settings after the cycle has started,

press PAUSE/CANCEL, then select the desired settings.

Press HOLD TO START to continue the cycle.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

Shirley Glazier 09 Apr 2024 | 19:03:57

Machine won't start. Control locked light on. What to do?

Whirlpool Duet GHW9100LW2 Use and Care Guide Page 12

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool Duet GHW9100LW2