Whirlpool ED22DQ Specifications download pdf (Page 12)

To reinstall shelf:

1. Hold shelf at front and back,

2. Tilt front of shelf up to a 45° angle to track,

3. Insert both rear shelf slides into upper channel

of track.

4. Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely

in the track before letting go of shelf.

Insert rear shelf

slldes Into

upper channel

of track.

Upper channel

of track

Removing the meat drawer and cover

To remove the meat drawer:

1. Slide meat drawer straight out to the stop.

2. Lift the front slightly,

3. Slide out the rest of the way,

4. Replace in reverse order.

To remove the cover:

1. Remove meat drawer and crisper.

2. Lift front of cover off supports.

3. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on walls

of refrigerator.

2. Lower front into place.

3, Replace meat drawer and crisper,

Pull out to the stop, lift the front,

and pull again.

Adjusting the meat drawer temperature

Cold air from the freezer flows into the meat drawer.

.,,=_.-.1= A

This

helps keep the meat drawer colder than the rest of <1=_.,(

the refrigerator for better storage of meats, fr__....{(_;_

Slide the control from side to side to let more or less

cold air through.

Use the control to

adjust the temperature

of the meat drawer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 93 94

No comments

Whirlpool ED22DQ Specifications Page 12