Whirlpool ED22DQ Specifications download pdf (Page 18)

Removing the ice maker storage bin

Remove, empty, and clean the storage bin if:

• The ice dispenser has not, or will not, be used for a

week or more

• A power failure causes ice in the bin to melt and

freeze together

• The ice dispenser is not used regularly

To remove ice bin:

1. Pull the covering panel out from the bottom and

slide it to the rear.

2. Lift the signal arm so it clicks into the OFF (up)

position. Ice can still be dispensed, but no more

can be made.

3. Lift the front of the storage bin and pull it out.

4. Empty the ice bin. Use hot or warm water to melt the

ice if necessary. Never use anything sharp to

break up ice in the bin. This can damage the bin and

dispenser mechanism.

5. Wash with mild detergent. Rinse well. Do not use

harsh or abrasive cleaners or solvents.

6. When replacing the bin, make sure it is pushed in all

the way. Then push the signal arm down to the ON

position to restart ice production.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 93 94

No comments

Whirlpool ED22DQ Specifications Page 18