Whirlpool 66161279 Use and Care Guide download pdf (Page 10)

Prepare Air Conditioner for Installation

Install Side Curtains

NOTE: Attach curtains to the air conditioner before placing the air

conditioner in window.

1. Place the tabbed side of the side curtain in the track on the

right-hand side of the air conditioner cabinet.

2. Slide the side curtain down the track until the curtain is

aligned with the top and bottom of the air conditioner cabinet.

3. Slide the side curtain frame into the top channel on the top of

the air conditioner and the track on the bottom of the air

conditioner.

4. Repeat above steps for the left-hand side curtain and frame.

Prepare Window for Installation

1. Measure the width of the window opening.

2. Mark the center line on the inside windowsill.

3. Attach the foam seal with adhesive strip to the bottom of the

upper window.

Position Air Conditioner

NOTES:

■ Handle the air conditioner gently.

■ Be sure your air conditioner does not fall out of the opening

during installation or removal.

■ The place where the power cord exits the air conditioner

should be no more than 6 ft (183 cm) from a grounded outlet.

■ Do not block the air intake or discharge louvers in the front

panel.

■ Do not block the louvers on the outside of the air conditioner.

A. Tabbed side of side curtain

B. Curtain frame

A. Width of window opening

B. Center line

WARNING

Excessive Weight Hazard

Use two or more people to move and install

air conditioner.

Failure to do so can result in back or other injury.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

No comments

Whirlpool 66161279 Use and Care Guide Page 10